L Bar Sealers These L-Sealers can be set up to operate many belt fed form & fill applications. When matched with the proper infeed conveyor this machine can wrap many products at rates above 50 ppm. Competitively priced, small footprint and easy to set up, the 2219 & larger 3322 are ideal for many applications. L-Bar Sealers - 2219 & 3322
2219 L-Sealer
| Model | 2219 L-Sealer | 3322 L-Sealer | | MAXIMUM PACKAGE SIZE | 19"L x 15.5"W x 7"H | 32"L x 19.5"Wx10.5"H | | | *MAXIMUM MACHINE DIMENSIONS CANNOT BE COMBINED | | MINIMUM PACKAGE SIZE | 4"Lx2-3/4"W / 2"L - 2 3/4" W With Optional Closing Conveyor | | FILM WIDTH | Max 28"CF / Min 6"CF / 54" and 72" flat film available | | ELECTRICAL | 240V, AC power, 1 phase | | AIR REQUIREMENTS | 4 CFM @ 80 PSI | 6 CFM @ 65 PSI | | CONVEYOR HEIGHT | Adjustable from 29 - 1/2" to 35 - 1/2"H | | MAXIMUM PKS PER MINUTE | Up to 50 Pkg per minute based on pkg size and configuration | | SHIPPING WEIGHT | 1,400 LBS | 1,800 LB | Standard Features of a Larger L-Sealer (Model 2219 and 3322): - NEW! Improved production rates
- NEW! 240 Volt AC power
- NEW! Inverter duty AC motors for maximum reliability
- NEW! Swing arm control panel for easy operator access
- NEW! Low profile "lay-on" cradle with power film unwind now comes standard
- NEW! Enhanced guarding now standard
- NEW! New "Smooth-mate" contoured exit conveyor for optimum transfer of products
- NEW! Multi-packing feature creates single land unitizing into one package
- Fully automatic product indexing and package length adjustment by either horizontal or vertical electric eye can accommodate most package configurations
- Thermostatically controlled hot knife seal system provides efficient long term operation
- Easy to operate package height and width adjustments
- Lay-on film cradle with power film unwind
- Self-contained film scrap wind-up system with adjustable tension control
- Unique film feed system allows wrapping of non-rigid products
- Adjustable leaving legs with casters
- Pin perforator system for air evacuation
- Variable speed belts (20-95 FMP)
- Solid Steel construction with powder coated finish
- MOTION TRIM™ technology to increase cycle rate
- Automatic dwell time compensator
- Front or rear product edge trip
- Solid state heater relays
- 24 VDC controls
- Scrap break alarm
- Adjustable soft/start with controlled braking
- UL electric enclosure
- Constant run for loose leaf applications
- Durable powder coated finish
|
